Guide

CZ Car Mount Guide: P-10, P-07, P-09, 75 SP-01, P-01, Shadow 2

CZ car mount guide: magnetic, model-specific mounts for the CZ P-10, P-07, P-09, 75 SP-01, 75 P-01, 75 BD and Shadow 2. Match the model and install it right.

CZ Car Mount Guide: P-10, P-07, P-09, 75 SP-01, P-01, Shadow 2

CZ makes two very different families of pistol. The P-07, P-09 and P-10 are polymer-framed duty guns; the 75 SP-01, P-01, 75 BD and Shadow 2 are all-steel classics. They feel nothing alike in the hand, and their slides are nothing alike either. That is why a CZ car mount is built for one model, not for the brand.

This guide lists the seven CZ models At The Ready makes mounts for, then covers how the mount holds a heavy steel pistol, the optic-ready choice, placement and a no-drill install.

Key takeaways

  • At The Ready makes a separate magnetic mount for the CZ P-10, P-07, P-09, 75 SP-01, 75 P-01, 75 BD and Shadow 2.
  • The 75 BD, 75 P-01 and 75 SP-01 each use their own mount; check the model marked on your pistol.
  • Every CZ mount is $95 standard or $105 optic-ready.
  • Steel-frame CZs are heavy, so use the screws or the tape with primer, never tape alone.
Pistol with a weapon light in a blue magnetic mount under a vehicle dash, the same setup used for a CZ car mount
A model-specific magnetic mount under the dash.

Seven CZ Models, Seven Mounts

The lineup is on CZ-USA’s website. At The Ready designs each mount from that model’s actual slide:

Your pistol At The Ready mount Standard Optic-ready
CZ P-10 P-10 mount $95 $105
CZ P-07 P-07 mount $95 $105
CZ P-09 P-09 mount $95 $105
CZ 75 SP-01 75 SP-01 mount $95 $105
CZ 75 P-01 75 P-01 mount $95 $105
CZ 75 BD 75 BD mount $95 $105
CZ Shadow 2 Shadow 2 mount $95 $105

The 75-series names are the ones people mix up. The 75 BD, 75 P-01 and 75 SP-01 are three different mounts. Look at the slide markings before you order, and if your CZ is not in the table, call At The Ready at (469) 304-8535. Every CZ mount is listed on one page.

How the Mount Holds a CZ

Rare-earth magnets sit in a premium ABS body shaped from that specific slide. On a steel-frame CZ the model-specific fit matters even more, because there is more weight to hold over bumps. The pistol seats the same way every time with the grip toward you. The mount holds the pistol itself, not a holster, and the trigger guard stays open. Finger off the trigger until you have decided to fire.

If your CZ wears a light or another accessory, contact At The Ready to check clearance before ordering.

Optic-Ready: P-10 Yes, Steel Frames Sometimes

The P-10 series ships optic-ready in most versions, and the Shadow 2 has optic-ready variants. If your pistol carries a red dot, or will, choose “Optic: Yes” for the optic-ready version at $10 more. The older 75-pattern pistols are usually run with iron sights, so the standard mount is the typical choice there.

Optic-ready does not by itself confirm clearance for lights or other accessories. The optic-ready gun mount guide explains the choice.

Where a CZ Car Mount Goes

The side of the center console and the lower dash are the two spots that work in most vehicles. A full-size SP-01 or Shadow 2 needs more clearance than a P-10 C, so hold your empty pistol in place from your normal seat and take a full grip before you install anything. Keep clear of the knee airbag zone and the pedals.

The car gun mount guide covers sedans and SUVs, and the truck gun mount placement guide covers pickups. If the grip sits against your knee, the angled mount adapter ($14.99) tilts it away.

Magnetic pistol mount on the side of a pickup center console
The console side keeps a full-size pistol within easy reach.

Installing Without Drilling

Screws, VHB tape and primer are included. In a vehicle, use the screws, or use the tape with the primer applied first. For a steel-frame pistol, do not rely on tape alone. The no-drill gun mount guide covers the tape method, and the installation page has a short video.

Standard magnetic pistol mount next to the angled mount adapter
The angled adapter changes the grip angle on a flat panel.

Colors, Text and Warranty

Black is the standard base color. Pick any of 25 colors and add up to 18 characters of custom text at no extra cost. Every mount is made in Wylie, Texas, by a veteran-owned company, with a lifetime warranty.

Magnetic pistol mount on the lower dash panel of a pickup truck
A lower dash install, one of the two most common spots.

Safety and the Law

A magnetic mount is quick access, not locked storage. Take the pistol with you or lock it up when you leave the vehicle. Practice the draw unloaded until it is second nature, and check the carry laws wherever you drive.

Frequently Asked Questions

Do the 75 SP-01 and Shadow 2 share a mount?

No. Each has its own mount built from its own slide. Order by the model marked on your pistol.

Is there one mount for all P-10 sizes?

Order from the P-10 mount page and call At The Ready at (469) 304-8535 if you are unsure which P-10 version you have.

How much is a CZ car mount?

$95 standard or $105 optic-ready, colors and custom text included.

Find the magnetic mount made for your CZ.

See CZ mounts
Share this guideFacebookXEmail

About At The Ready

At The Ready designs, prints and assembles model-specific pistol mounts in Wylie, Texas. Each mount is built from the actual slide of the firearm it is made for. We are veteran-owned and operated.

Leave a Reply

Your email address will not be published. Required fields are marked *